Product Details
Product Name: Face seal fittings
- Material:316 stainless steel, alloy, brass, duplex stainless steel
- Design:Comply with CGA, CGA DISS, and DIN standards
- Size:1/16″ to 1″ and 6 mm to 18 mm
- Various MaterialGasket: 316L SS(1000 °F (538 °C)),Copper(400 °F (204 °C)),Nickel(600 °F (316 °C))
- VariousShort Fractional Tube Butt Weld,Short Metric Tube Butt Weld,Long Fractional Tube Butt Weld, Long Metric Tube Butt Weld,Short Fractional Automatic Tube Butt Weld,Short Metric Automatic Tube Butt Weld,Long Fractional Automatic Tube Butt Weld,Long Metric Automatic Tube Butt Weld,Short Tube Socket Weld,Tube Socket Weld,Fractional Tube Butt Weld,Tube Port,
- Features:
- Metal-to-metal seal to provide perfect leak-tight service for working conditions from critical vacuum to high pressure
- Precision manufactured gasket to ensure best performance
- Test port at nut for easy leak testing
- Silver-plated female threads
- Standard surface roughness finished to an average of Ra 10 µin. (0.25 µm) or electropolished to Ra 5 µin. (0.13 µm) optional
- All seal faces and male threads protected with plastic caps
- Sizes range from 1/16″ to 1″ and 6 mm to 18 mm
- Every gland and body marked with size, material and heat number
- With special cleaning and packaging, applicable to oxygen-enriched atmospheres
- Maximum allowable leak rate: 4×10 std·cm /s.
Installation Instructions
- Assemble the gland, nut, gasket and male nut as below. Finger tight the nut.
- For fittings with 316L SS and nickel gaskets, tighten the nut 1/8 turn with a wrench while holding the male nut or the fitting body steady. Tighten the nut 1/4 turn for those with copper gaskets.
Cautions
- Dimensions are for reference only and are subject to change
- Over-tightening will damage the sealing beads and lead to possible leak
- Utilize a new gasket for each assembly
- Tungsten Inert Gas Welding (TIG) is recommended
- Always apply sealing materials compatible with the fluid on tapered pipe threads
- Do not loosen or tighten fittings when the system is pressurized
- Integral Face Seal fittings must remain stationary during installation. Integral male Face Seal fittings should not be paired with integral female face seal Instead, they should be used in conjunction with rotating nuts and glands.
Reviews
There are no reviews yet.